Model No.: G56 Series

  • Air compression can be used to pressurize beer pumps
  • Cost-effective: no need for mixed gases or gas blenders
  • The beer pump increases the pressure in the product dispense line, which ensures the inherent gas in the solution (beer) cannot break out
  • Smaller I.D. tubing can be used in some installations, which reduces the amount of beer wasted when cleaning lines
  • The air/gas used to power the pump never comes into contact with the beer, providing protection from flat or tainted beer due to impure air contamination or oxidization
  • Capable of traversing up to 800 feet (244m) horizontally through a single line
  • Capable of delivering beer up to 10 stories (30m) vertically through a single line
  • Pump can be used to aid in beer line cleaning through wall mounted cleaning sockets
  • Infinitely variable to suit all runs and rises
  • Can dispense multiple faucets (up to 5) from a single keg or keg series. This will cut walk-in cooler clutter by lowering the number of kegs on tap at one time which promotes product quality/freshness
  • Feeds up to 3 faucets through a single line

Applications:

Dispensing beer from a keg, cask or brew kettle; Both long or short draw systems
Pump Drive CO2 gas, Nitrogen or compressed dry filtered air
Materials of Construction (wetted parts:) Polypropylene, Santoprene®, EPDM, AISI 304 Stainless Steel
Operating temperature 34°F to 120°F; 1.1°C to 49°C
Displacement  3.2 oz (91ml) per cycle
Flow Rate 5 GPM (18.9 LPM) – open flow
Operating Pressure 10 – 90psi; 0.7 – 6.2 bar max
Maximum Liquid Inlet Pressure    30 psi; 2.1 bar max
Dimensions (H x W x D) 5.27 x 3.21 x 4.58 (inches) 133.8 x 81.5 x 116.3 (mm)
Approvals CE, SK, NSF Standard 18
Mean Service Life 70,000 gallons (265 liters)
Warranty Period 3 years
Weight 0.56 (kg) 1.24 (lb)

Brochures

Installation/Operation Manuals

Guidelines