Diesel Transfer Pumps

Sliding Vane 18685 – 7 GPM

Continuously rated duty, AC diesel or light oil transfer pump.

  • 7.8 GPM (29.5 LPM) output at 10′ (3m) total head
  • Self-priming up to 5′ (1.5m) vertical lift
  • 20′ (6m) maximum head
  • Fitted with thermal overload protection and 6′ (183cm) power cord with 3-prong grounded plug

WARNING:

Sliding vane pumps must not be used for gasoline, petroleum products or any fluid with a flash point below 98°F (37°C).

Technical Brochures

General Pumping Advice, Good Practice and Support Marine Toilets Wizard Rule Bait/Livewell Pumps Advice and Support Rule Bait/Livewell Pumps Installation Guide Rule Bilge Pumps Advice and Support Troubleshooting a Pressurised Water System Warranty Information