Ventilation Blowers

In-Line Blowers

Rule In-Line Blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion-resistant motor housings for long life. Compact and easily installed on any flat surface, Rule In-Line Blowers provide higher air flow and lower amp draw. In-Line Blowers are available in two sizes: The 140 with 3″ ducting, and the 240 with 4″ ducting. Both sizes are available in 12 and 24 volts.

  • Efficient high-volume air flow
  • Quiet operation
  • Low amp draw
  • Slip-on inlet and outlet ducting connections
  • Sealed motor shaft for moisture protection
  • Corrosion-resistant nickel-plated motor housing
  • ABYC – H2; ISO 9097
  • IMCI (CE)
  • N.M.M.A. type accepted
  • USCG 183.410 Compliant; Ignition protected
General Pumping Advice, Good Practice and Support Marine Toilets Wizard Rule Bait/Livewell Pumps Advice and Support Rule Bait/Livewell Pumps Installation Guide Rule Bilge Pumps Advice and Support Troubleshooting a Pressurised Water System Warranty Information