Standard Xchange’s line of Heavy Duty Coils uses an extruded, integral finned tube with header construction in an outer casing. The integrally finned tube offers a longer life than other types of finned tubes with no possibility of the fins loosening, no loss of heat transfer and no corrosion at the fin to tube interface.
Straight Tube, Removable bundle, Internal Clamp ring-type Floating head cover. 2, 4 and 6 pass options. Channel construction. Shell Diameters from 6″ to 42″ OD. 5/8″ or 3/4″ Bare tubes available. Constructed to comply to ASME Code, Section VIII, Div 1, TEMA Standards Type BES/AES. Materials: Steel, Stainless Steel, Copper Alloys – Other material options
Straight Tubes, Internal Bolted Floating head cover, pull through construction, removable tube bundle. Shell diameters from 8″ to 42″ OD. 2, 4 and 6 pass options. 1/2″, 5/8″, 3/4″, 1″ OD Bare or Lo Fin tubes. Constructed to comply with ASME Code, Section VIII, Div 1, TEMA Standards Type BET/AET. Materials: Steel, Stainless Steel, Copper
Semi-welded Plateflow design utilizes two plates laser welded together to form a cassette. The cassettes form channels within which the fluid flows. One fluid flows within the welded cassette, the other fluid between the welded cassettes. Two ring gaskets and a field gasket are used between adjacent cassettes. This design reduces the welded-side’s exposed gasket
Compact bar and plate design using air for cooling where water is unavailable, costly or undesirable. Aluminum construction Thermally efficient. Up to 65% smaller than fin tube designs Non-louvered fin design provides high heat transfer rates, prevents clogging and is easy to clean Low noise options available Standardized sizes for lower cost and shorter lead-times
U-type, Removable-bundle Bonnet or Channel construction. 2, 4 or 6 pass options. Shell Diameters from 4″ to 42″ OD. 3/8″, 1/2″, 5/8″, 3/4″, 1″ OD Bare or Lo Fin tubes available. Constructed to comply with ASME Code, Section VIII Div 1, TEMA Standards Type BEU/AEU. Materials: Steel, Stainless Steel, Copper Alloys – Other material options
Straight Tube, Fixed tubesheet with removable channel or bonnets. 1, 2, 4 or 6 pass options. Shell Diameters from 5″ to 42″ OD. 3/8″, 1/2″, 5/8″, 3/4″, 1″ OD Bare or Lo Fin tubes. Meets ASME Code Section VIII, Division 1 and TEMA Type BEM/AEL for C200 and type NEN for C210. Materials: Steel, Stainless
Straight Tube, Removable Bundle, External Packed Floating Head, 1, 2, 4 or 6 pass options. No packing exposed to tubeside fluid. Shell Diameters from 8″ to 42″ OD. 1/2″ “, 5/8″ or 3/4″ Bare of Low-fin tubes available. Meets ASME Code, Section VIII, Div. 1, TEMA Standards Type BEP/AEP. Materials: Basic Materials: Steel, Stainless Steel,
Double-wall units prevent intermixing of fluids due to a plate failure. Two plates are pressed together to ensure a tight fit to minimize heat transfer losses while maintaining a leak path in case of plate failure. Plate and Frame heat exchangers use a combination of chevron-style heat transfer plates sequenced between a frame plate and
Free-flow models have wider plate gaps ranging from 5.4 mm to 11.5 mm and can handle fluids with particulate pulp or fibrous materials up to 2mm in diameter and 5mm long. Free-flow models feature minimum metal-to-metal contact points between elastomer adjacent plates to reduce points for particles to catch. Free-flow models available in 2″ to
