The controller can store two different pressure setpoints; only one is active at any given time. The active setpoint determines the controller’s target pressure. Select the active setpoint on the User Interface Board.
For irrigation systems: Having two sets of operating conditions can be especially useful. To switch back and forth, use devices such as a timer-controlled relay, float switch, pressure switch or any other non-powered switch to open and close the Setpoint Select Input.
To change the pressure setpoint from the default, use the up or down buttons. When the Setpoint Select Input is open, Setpoint 1 is active and the display shows “SP1.” The default setting is 60 PSI.
To change the pressure setpoint from the default, use the up or down buttons. When the Setpoint Select Input is closed, Setpoint 2 is active and the display shows “SP2.” The default setting is 70 PSI.